Locked Out Of Home: How Deadbolts Work & How A Locksmith Can Quickly Pick Them

Posted by on Oct 29, 2014 in Blog, Business

Without the right kind of tools, picking a deadbolt lock can be a frustrating task when you are locked out of the house. Deadbolts can actually be opened fast when you know how they work. Below, you will learn how deadbolts work and how a locksmith uses tools to pick them fast. Check it out! How Do Deadbolts Work? Deadbolts work by way of a pin and tumbler system that can be manipulated depending on how a key is turned in the keyhole. Without the pins being manipulated, a deadbolt is difficult to open, which is why they are so effective for the security of a home. There are basically a series of pins inside of a deadbolt that have two sides for locking or allowing the door to open. The bottom half of the pins sit in the cylinder plug (where the key is inserted) to prevent the door from opening. The top of the cylinder plug has springs in which the upper portion of the pins press against to help keep the deadbolt secure. However, the right tools and skills can make picking a deadbolt easy, just as locksmiths are able to do. How Do a Locksmith Use Tools to Quickly Pick Deadbolts? A locksmith is able to pick a deadbolt fast with the help of a pick and tension wrench. Manipulating the double-sided pins is the main task of picking a deadbolt, which is done with the pick. The pick is a long and narrow tool that is slightly curved on one end for lifting the pins up. However, the pick cannot be used until the keyhole is turned in the same way a key turns it. The tension wrench is used for turning the keyhole. It is narrow like the pick and long. To pick a deadbolt within minutes, a locksmith simply inserts the tension wrench inside of the keyhole and turns it like a key. While keeping the tension wrench in position, the pick is inserted in the keyhole with the curved end going inside. The locksmith then quickly raises each of the pins until a low clicking noise is heard to verify that they are in place, and the deadbolt unlocks when all the pins are lifted. It is always a good idea to keep an extra set of keys in case the incident happens again. A locksmith can unlock your deadbolt and create the extra keys you...

Read More »

Are Movers Relocating You To A New Province? Learn About Replacement Value Insurance

Posted by on Oct 29, 2014 in Blog, Business

Relocating to a new province is a lot easier when you have professional movers assisting with the task. Moving companies are not only efficient about packing and transporting your belongings, but they also offer insurance to give you security that you are covered in the event of an accident. In this article, you will discover why purchasing replacement value moving insurance is a good idea and how much of the moving process is covered. Why Is Purchasing Replacement Value Moving Insurance a Good Idea? Replacement value moving insurance is good to have when you are relocating a large amount of valuable items. The coverage will give you the chance to get your money back if anything happens to accidentally get broken during the moving process on behalf of the movers. You will get the full value of what the damaged items are worth in stores at the present time, rather than based on the depreciated value. If you opt for replacement value insurance, the moving company may insist that you give them a list of what your assets are worth. You may also have to provide quotes to verify that your belongings are valued at as much money as you say they are. Don’t relocate without moving insurance, because you never know when an accident will take place. How Much of the Moving Process Is Covered by Replacement Value Insurance? Replacement value insurance covers your belongings as soon as the movers begin packing them up. The coverage is for the packing of the boxes, transporting them to the truck, and getting them to your new location. No matter how safe the driver of the truck is, other drivers can wreck into him or her and cause your belongings to get damaged, so be prepared just in case. The coverage will also extend to after the professionals have finished the job they were hired for. The reason is due to the possibility of you finding broken items when you begin unpacking boxes, such as if you wait a while before unpacking. If anything is found damaged, you can file a claim with the moving company within so many months, based on their policy. Leave your belongings in the hands of professionals, such as AAA B C Moving Inc., to make your move less stressful. Don’t worry about anything getting damaged, because you can invest in replacement value moving insurance to make sure you are compensated for the items in full if an accident...

Read More »

Flu Season? Cleaning Tips For Preventing Germs At Your Office

Posted by on Oct 27, 2014 in Blog, Business

As the cold weather approaches, you might be looking forward to snowy weather and the holidays. One thing that you probably aren’t looking forward to is getting sick, but influenza-like-illness reports were high across the nation during the 2013–2014 flu season. To help protect yourself and your co-workers from spreading germs, remember these tips to keep your office as clean and sanitary as possible. Distribute Hand Sanitizer Around the Office By keeping hand sanitizer all throughout your office, you can encourage people to use it before touching shared items or shaking hands. Place it near conference tables, telephones, printers, copiers and other areas where people tend to congregate, and refill the containers regularly throughout the season to encourage use. Use Sanitizing Cleaning Wipes Everywhere It’s always a good idea to wipe down shared surfaces, such as telephones, computer keyboards, printers and copiers, but it’s particularly important this time of the year. Make a point to use a sanitizing cleaning wipe on these surfaces several times a day, and keep them close at hand throughout the office to encourage the same from your coworkers. Ask Your Commercial Cleaning Company To Step Up Its Game Let your commercial cleaning crew know that you are concerned about the flu virus, and ask about how the company plans on keeping your office sanitized this season. Also, consider hiring your janitorial services to come more frequently during the winter. Not only can additional cleaning help combat germs during flu season, but it will also help with the messy snow and ice that can get tracked throughout the building. Keep the Kitchen Extra Clean If you have a kitchen in your office, make sure that you keep it extra clean. Because of the comfort foods and holiday-themed treats that are often shared throughout the winter months, the spreading of germs can be quite common. Wash all coffee mugs both before and after use in case someone else has used them, and encourage the use of serving utensils when people prepare their plates. Also, wipe down all surfaces that get touched often, such as the community coffee maker and the refrigerator door handle, and keep foods covered when not being eaten to prevent contamination from dirty hands, sneezing and coughing. Preventing germs in the office might not seem easy during flu season, but following these tips can help. Hopefully, you will be able to keep everyone in your office safe from the flu virus while at work this winter. If you are looking for a reputable commercial cleaning service in your area, consider contacting All Star Maintenance...

Read More »

Centrifugal Pump Maintenance

Posted by on Oct 23, 2014 in Blog, Business

Centrifugal pumps are used in the operation of equipment in virtually every industry there is out there today. If you use a centrifugal pump in your industry, you know the importance in making sure it is in working order. If your pump goes down, production is halted. Routine maintenance can prevent costly repairs from occurring. Here are some of the things that should be regularly checked on a pump to make sure there are no flaws or situations that need remedying. Safety First Everyone who has any type of close contact with a centrifugal pump should be aware of how to do small maintenance on it periodically. The equipment manual should be kept in a location that is accessible at all times to those that may be taking a look at the pump. Should there be a problem that arises, the phone number for the service company of the unit should be displayed in an area for all to access. When working on a centrifugal pump, the electricity should be shut off before touching anything. You should make sure there is a lock out-tag out procedure in place when working on the pump so that no one mistakenly turns on the equipment it is coupled with. There should be a written procedure available for any routine maintenance and a checklist which should be signed by whoever did the check. Things That Should Be Looked At Engine oil is one thing that should be regularly maintained. Without the proper level of oil, the pump may become unlubricated and in turn seize the motor of the unit. Oil should be added to the bearing reservoirs monthly. The gaskets should be looked at to make sure that there are no oil leaks occurring around them. The bearings should be checked for noise level and cavitation daily. Check the water for discoloration and check the temperature of the bearings to make sure they are not overheating. Inspect the bearings and the oil rings through filling ports. The debris should be cleaned out from the bearing brackets monthly. The water cooling temperature should be checked daily to make sure there is no overheating.  Every half-year, a coating of rust preventative product should be applied to the pump to avoid any rusting. If the unit becomes rusted, it can compromise the mechanisms within, causing the pump to work ineffectively or not at all.  Servicing The Pump The best thing you can do is have a service company come and do the maintenance at regularly scheduled intervals. You will be assured that your pump will be maintained properly, and if there is a problem the service company can fix it without trouble. They will have the proper replacement parts available. You can sign a service contract to make sure you have continuous service on your machine. (For more questions about centrifugal pumps, call a company such as...

Read More »

3 Features To Look For In An Ergonomic Office Chair

Posted by on Oct 22, 2014 in Blog, Business

Do you need new office furniture for your business? If you have workers who spend much of their time sitting at desks, it’s important that you find ergonomic office chairs. An ergonomic chair is one that provides maximum back support. It can help your workers avoid back pain and injuries, which can often lead to costly medical bills and time away from work. In that sense, ergonomic chairs aren’t just about comfort. They’re also about saving you money. With ergonomic chairs, you’ll have a healthier work force that has fewer absences. Here are a few features to look for in an ergonomic chair: Adjustable backrest. Most chairs have an adjustable seat height, but not all office chairs have adjustable backrests. This is important because the back rest helps reinforce good posture. Slouching is a leading cause of back pain. A backrest that is set low and far back on the chair facilitates slouching. It makes it easy for a person to slide down in their seat and lean back. Conversely, a backrest that is high and forward forces a person to sit straight up. Of course, the appropriate placement of the back rest will be different for each person, which is why an adjustable back rest is so important. Chairs with fixed back rests may be ergonomic for some people, but can’t be ergonomic for everyone. Lumbar support. You’ve probably heard of lumbar support, but do you really know what it means? A person’s spine naturally curves inward as it moves further down the back and toward the tailbone. Chairs that have straight vertical backrests don’t provide support to that lower, inward-curving portion of the back. An ergonomic chair will have a backrest that is sloped inward to provide lumbar support. It could also come with a lumbar attachment that can be affixed to the backrest to provide sufficient support. Swiveling ability and wheels. Some of the most common back injuries come from reaching or straining for faraway items. Similarly, many people suffer neck injuries by turning their head too often. A chair that has wheels and swiveling ability can reduce these injuries. Wheels widen a person’s reachable space because they can simply roll rather than strain themselves. Swiveling allows a worker to turn their whole body rather than just turning their neck. There are numerous other features to look for, such as adjustable seat height and adjustable armrests. Talk to an office furniture supplier such as Bf Workplace about what other features can improve your office’s ergonomics and your employees’...

Read More »